Bead Cell Phone Charm

I recently saw a cellphone charm that I absolutely loved, so I decided to recreate it for myself. This is a a quick and easy jewellery making project that only takes a few minutes and looks amazing when completed.

This is how I made it.

For this project you will need the following:

1) 2" head pin.
2) 2 glass beads.
3) 1 5mm swarowski crystal.
4) 4 silver spacers.
5) cell phone charm holder (these can be purchased at most craft stores or bead supply stores).

You will also need a pair of needle nosed pliers.

First take the 2" head pin. Holding the head pin, thread the first spacer. Next, thread one of the glass beads, then thread another spacer. Thread the swarowski crystal and then another spacer. Finally, thread the remaining glass bead and the last spacer. Using the needle nose pliers create a loop at the top of the head pin. Slightly open up the loop that you just created and insert the end of the cell phone charm holder. Close the loop at the top of the head pin using the needle nose pliers.

Good luck.

Below is the pic that inspired my cell phone charm.